- 博客(13)
- 资源 (4)
- 收藏
- 关注
原创 CAD二维导入ICEM
在ICEM画二维图还是有点麻烦,尤其是涉及到类似于切线几何位置关系的时候,线条不好定位。在CAD软件中画好二维图形,然后导入ICEM,自认为比较顺手。步骤如下:(1)在CAD中画好二维图。(2)生成面域。快捷键:REG(3)输出为sat格式。(4)打开ICEM,File→Improt Model→ .sat(选择上一步导出的.sat文件)→打开→Apply...
2022-03-23 09:49:18 3598 2
原创 Fluent 粘度计算方法总结
(1)Blottner’s curve fit(用于双温度模型)其中,A、B和C代表拟合常数(2)Kinetic theory其中:Mw是分子质量,Ωμ=Ωμ(T*),σ和(ε/kB)是Lennard-Jones参数,(3)温度的函数picewise-linear:piecewise-polynomial:polynomial:Sutherlans’s law:两系数: 三系数:常用的空气的参考值,μ0=1.716e-5 kg/(m s),T0=273.11 K,S=110.56 KP
2022-01-06 22:18:25 3517
原创 OpenFOAM多孔介质模型_DarcyForchheimer
OpenFOAM中添加多孔介质区域及进行相关计算可通过DarcyForchheimer模型来实现。具体步骤如下:(一)设置多孔介质区域在“system”文件夹下添加“topoSetDict”文件eg:/*--------------------------------*- C++ -*----------------------------------*\ | ========= |
2021-12-17 10:18:22 1649
原创 Fluent材料属性之比热容计算方法
材料的定压比热容的设置在Fluent中有如下几种方法。温度函数法:piecewise-linearpiecewise-polynomialnasa-9-piecewise-polynomialpolynomial动理学方法:Kinetic Theory计算公式分别为:piecewise-linearpiecewise-polynomialnasa-9-piecewise-polynomialpolynomialKinetic Theory...
2021-07-09 10:15:04 5135
原创 ICEM几何模型导入
ICEM几何模型导入有两种方法(1)File→Import Model该方法,直接选中你的几何模型文件(eg: x_t)即可(2)File→Import Geometry
2021-06-03 09:17:06 8235
原创 Fluent坐标轴的移动
选用轴对称模型时,旋转轴一定要和Fluent的坐标轴重合。如果不重合,可以选择移动坐标来实现。Domain→Transform→Translate
2021-05-25 11:07:32 6412
原创 fluent质量流量入口边界条件设置
轴对称模型,质量流量的值是实际模型的总流量压力设置:当入口为亚音速时,Fluet会自动忽略所设置的压力值;当入口为超音速时,所设置的压力值才起作用。
2021-05-24 22:43:37 7441
原创 Fluent 中Pressure-Based Solver和 Density-Based Solver的区别
压力基求解器(Pressure-Based Solver)官方理论手册说明:The pressure-based solver employs an algorithm which belongs to a general class of methods called the projection method. In the projection method, where in the constraint of mass conservation (continuity) of the vel
2021-05-22 20:10:08 2468
原创 topoSet帮助
topoSet 应用官网链接链接: https://openfoamwiki.net/index.php/TopoSet#topoSetDict_description.中文解释链接链接: https://mp.weixin.qq.com/s/cTmcjdTrh-OeZWdyOHWIEg.
2021-03-07 20:38:12 585
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人