cylOoO的博客

NUC972平台XR819驱动及内核更改

sdd_xr819.bin/fw_xr819.bin/etf_xr819.bin/boot_xr819.bin 4个文件

The HEF4081B is a quad 2-input AND gate. The outputs are fully buffered for highest noise immunity and pattern insensitivity to output impedance variations. It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input. The HEF4081B is suitable for use over both the industrial (−40 °C to +85 °C) and automotive (−40 °C to +125 °C) temperature ranges.

STM8S是基于8位框架结构的微控制器，其CPU内核有6个内部寄存器，通过这些寄存器可高效地进行数据处理。STM8S的指令集支持80条基本语句及20种寻址模式，而且CPU的6个内部寄存器都拥有可寻址的地址。如果想了解全部STM8S指令集，请参考STM8 微控制器家族编程手册 (PM0044)。

MSP430F2-01-System.pdf MSP430F2-02-Re_Iint_OM.pdf MSP430F2-03-CPU.pdf MSP430F2-04-clock.pdf ·······

This document contains complete and detailed description of all modules included in the AVR XMEGATM A Microcontroller family. The XMEGA A is a family of low power, high performance and peripheral rich CMOS 8/16-bit microcontrollers based on the AVR® enhanced RISC architecture.

The Atmel® SAM D20 is a series of low-power microcontrollers using the 32-bit ARM® Cortex®-M0+ processor, and ranging from 32- to 64-pins with up to 256KB Flash and 32KB of SRAM. The SAM D20 devices operate at a maximum frequency of 48MHz and reach 2.14 Coremark/MHz. They are designed for simple and intuitive migration with identical peripheral modules, hex compatible code, identical linear address map and pin compatible migration paths between all devices in the product series. All devices include intelligent and flexible peripherals, Atmel Event System for inter-peripheral signaling, and support for capacitive touch button, slider and wheel user interfaces.

PSoC® 4 CapSense®设计指南显示了如何在PSoC 4 器件系列中设计电容式触摸感应应用。PSoC 4 中的CapSense 特性能 够提供前所未有的信噪比、一流的防水性能，以及各种传感器，如按键、滑条、触控板和接近传感器。本指南介绍的是 PSoC 4 CapSense 操作、CapSense 设计工具、PSoC Creator™CapSense CSD 组件、性能调试以及设计注意事项。