hopezheng的博客

The MAX9288/MAX9290 gigabit multimedia serial link (GMSL) deserializers receive data from a GMSL serializer over 50Ω coax or 100Ω shielded twisted-pair (STP) cable and output deserialized data on the CSI-2 outputs. The MAX9290 has HDCP content protection but otherwise is the same as the MAX9288. The deserializers pair with any GMSL serializer capable of coax output. When programmed for STP input, they are backward compatible with any GMSL serializer. The audio channel supports L-PCM I2S stereo and up to eight channels of L-PCM in TDM mode. Sample rates of 32kHz to 192kHz are supported with sample depth up to 32 bits. The embedded control channel operates at 9.6kbps to 1Mbps in UART-to-UART and UART-to-I2C modes, and up to 1Mbps in I2C-to-I2C mode. Using the control channel, a μC can program serializer, deserializer, and peripheral device registers at any time, independent of video timing, and manage HDCP operation (MAX9290). Two GPIO ports are included, allowing display powerup and switching of the backlight, among other uses. A continuously sampled GPI input supports touch-screen controller interrupt requests in display applications.

ISO 26262 用于应用到安全相关的系统(包含一个或多个电子电气系统),并且是应用到最大 重量达到3.5 t 的乘用车辆上的一系列产品上.ISO 26262 不发表在特种车辆上使用的单独 的电子电气系统,比如为残疾人驾驶人设计的车辆.先于ISO 26262 发表日期的系统在概述 部分被免除. ISO 26262 发表了可能由安全相关的电子电气系统的多个功能行为(malfunctioning behaviour)引起的危害(包括这些系统的交互过程).它不包含危害如电击(electric shock)、起 火(fire)、烟雾(smoke)、加热(heat)、辐射(radiation)、毒性(toxicity)、易燃性(flammability)、 反应性(reactivity)、腐蚀(corrosion)、放电(release of energy)和非由安全相关的电子电气系 统的多种功能行为引起的相似的故障. ISO 26262 不发表电子电气系统名义上的行为(the nominal performance),即使存在功能行 为标准用于这些系统(比如主动被动安全系统,刹车系统,ACC). ISO 26262 的这一部分仅是教育性的章节。 这一部分提供了ISO 26262 标准的见闻纵览,作为附加说明, 目的是加强对ISO 26262 标准 其他部分的理解. 它描述ISO 26262 标准的一般性概念，用于使标准更容易理解.内容从一 般性概念延伸到了专业内容.关于ISO 26262 标准的这一部分与其他部分不一致的情况,采 用SO 26262 标准专用部分的需求,推荐和信息.

The MAX9286 Gigabit multimedia serial link (GMSL) deserializer receives data from up to four GMSL serializers over 50Ω coax or 100Ω shielded twisted-pair (STP) cables and output data on four CSI-2 lanes. Each serial link has an embedded control channel operating from 9.6kbps to 1Mbps in UART-to-UART, UART-to-I2C, and I2C-to-I2C mode. Using the control channel, a μC can program the serializers, deserializer, and peripheral device registers at any time, independent of video timing. A maskable broadcast write speeds programming of image sensor registers.

The ToolStick Base Adapter and daughter cards are distributed without any protective plastics. To prevent damage to the devices or the host PC, please take into consideration the following recommendations when using the ToolStick:  Never connect or disconnect a daughter card to or fromthe ToolStick Base Adapter while the Base Adapter is connected to a PC.

The Atheros AR9331 is a highly integrated and cost effective IEEE 802.11n 1x1 2.4 GHz Systemon-a-Chip (SoC) for wireless local area network (WLAN) AP and router platforms

本程序有仿真，有完整源代码，是一种基于单片机控制的LCD1602显示，主要有时钟可调，温度显求，DS1302时钟芯片控制的，相当不错。

十分强大的模拟电子钟，有仿真，有完整源代码，实在太强了，我第一次看到过这么强的，强烈推荐下载。

单片机+时钟芯片+温度检测+LCD显示，有proteus仿真，代码完整，推荐下载。

LCD1602时钟可翻页代码，不错，有proteus仿真，程序完整，大家可下载。

#include<reg52.h> #define uint unsigned int #define uchar unsigned char #define lcd_data P0 #define lcd_com P0 sbit lcd_en=P3^4; sbit lcd_rs=P3^5; sbit KEY=P3^0; sbit KUP=P3^1; sbit KDOWN=P3^2; uchar code disp1[]=" 2009-01-01";

6502指令集(适合初学者)......................

很好的6502学习资料......图解6502,更适合初学者