PHONONE的博客

VPX 连接器资料 This specification covers the requirements for application of MULTIGIG RT 2, RT 2-R, and RT 3 connectors used to interconnect printed circuit (pc) boards. RT 2 and RT 2-R connectors are compliant to the VITA 46 standard for VPX architecture, and TE supports other custom and non-standard MULTIGIG variations. RT 3 is interface compatible with RT 2 and RT 2-R, but utilizes different board footprints with smaller compliant pins and plated thru holes to achieve 16 to 25 Gbps data rates. The connectors consist of end-to-end stackable modules, available in vertical receptacles (backplane application) and right-angle plugs (daughtercard application). Half and full-size connector modules are used within slots of a backplane/plug-in card application. The VITA 46 standard defines connector requirements and OpenVPX standard slot configurations are defined in VITA 65.0 and 65.1.

VITA46.10 RTM ，关于VPX RTM 背板后连接技术。

74和4000系列逻辑电路目录 型号-功能对照表 便于快速查找型号、设计选型

s a 4096(H) x 4097(V) solid state Charge Coupled Device (CCD) full frame sensor. The CCD is intended for advanced scientific, space, industrial, and commercial digital imaging applications. The CCD486 active area is organized as an array of 4096 horizontal by 4097 vertical imaging elements. The pixel pitch is 15µm with a 100% fill factor. For dark reference, each readout line is preceded by 18 dark pixels. The imager is available in front-illuminated as well as back-illuminated configuration. A split readout architecture has been adopted to facilitate high data rates with simultaneous readout from four output ports, and provides the flexibility to read out the entire image frame from two output ports, or from a single output port to simplify the drive electronics requirements

60mm方形CCD，不是CMOS喔。 a 4096(H) x 4096(V) solid state Charge Coupled Device (CCD) Full Frame sensor. The CCD is intended for advanced scientific, space, industrial, and commercial digital imaging applications. The CCD6161 active area is organized as an array of 4096 horizontal by 4096 vertical imaging elements. In addition to 4096(H) x 4096(V) imaging elements there are 8 peripheral columns on left and right edges of the imaging area to improve non-uniformity at t h e edges. These 16 peripheral columns are not connected to t h e serial register. There are 32 isolation rows on top and bottom of the imaging area and these 64 isolation rows are covered by metal, making the total array 4112(H) x 4160(V). The pixel pitch is 15µm with a 100% fill factor. For dark reference, each readout line is preceded by 18 dark pixels. A split readout architecture has been adopted to facilitate high data rates with simultaneous readout from four output ports, and provides the flexibility to read out the entire image frame from two output ports, or from a single output port to simplify the drive electronics requirements.

A 9216 x 9216 active element solid state Charge Coupled Device (CCD) Full Frame sensor. The CCD is intended for advanced scientific, space, and aerial reconnaissance applications. The CCD 595 is organized as an array of 9216 horizontal by 9216 vertical imaging elements. The pixel pitch is 8.75um with a 100% fill factor. Three-phase clocking is employed in the imaging area with two-phase clocking in the serial readout registers. Image readout is performed via 4 serial registers containing 19 isolation rows between imaging and readout sections. The imaging array can be clocked unidirectional (4-output configuration) or bidirectional (8-output configuration). The imaging area segments are split in mid-array for the latter configuration. To maximize the exposure/readout cycle rate, concurrent array and serial register clocking is utilized. Fast transfer clocking between the array and serial registers is accomplished with strapped transfer gates that load each line in less than five microseconds.

The Force/Torque (F/T) sensor system measures the full six components of force and torque (Fx, Fy, Fz, Tx, Ty, Tz) using a monolithic instrumented transducer. The F/T transducer uses silicon strain gages for excellent noise immunity. The use of silicon gages allows the F/T transducer to have high stiffness and increased overload protection. All transducer models are available with Net F/T, DAQ F/T, or Controller F/T interfaces

设计PICe卡的必要资料 1）PCI Express® Card Electromechanical Specification Revision 2.0 April 11, 2007 2）PCI Express® Base Specification Revision 5.0 Version 1.0 22 May 2019

机器人是一个非常复杂的系统，在机电一体化和功能性以及 电气方面存在许多设计挑战。在实现一个可行的工作系统 前，您需要解决了这些挑战或做出一些决定。 利用机器人系统的所有不同技术特性，德州仪器 (TI) 的模拟 和嵌入式技术提供了许多不同的产品和设计，可以帮助解决 与机器人有关的问题，实现智能、自主和协作机器人的开发。 这本电子书汇集了技术文章、白皮书和应用手册，它们均包 括有助于帮您设计下一个机器人系统的技术。

Use only good quality sandpaper. The sandpaper controls the sanding efficiency, not the amount of force you apply to the tool. Excessive force will reduce the sanding efficiency and cause motor overload. Replacing the sandpaper regularly will maintain optimum sanding efficiency.

precision-3630-workstation_users-guide_zh-cn 用户手册，这个不太容易找到啊

00000 没有查询到任何故障 00001 制动器控制单元 00002 变速器控制单元 00003 控制单元 00224 碟型天线需要重新校准 00237 ABS 电磁阀: 左前 N59 00238 ABS 电磁阀: 右前 N58 00239 ABS 电磁阀: 左后 N57 00240 ABS 电磁阀: 右后 N56 ">00000 没有查询到任何故障 00001 制动器控制单元 00002 变速器控制单元 00003 控制单元 00224 碟型天线需要重新校准 00237 ABS 电磁阀: 左前 N59 00238 ABS 电磁阀: 右前 N58 00239 ABS 电磁阀: 左后 N57 00240 ABS 电磁阀: 右后 N5 [更多]

CMOS sensors are now widely used in cellular phones and other mobile devices, and as a result, sales of these devices have been increasing rapidly. Furthermore, demand for CMOS sensors has been increasing in fields that require high-speed imaging functions, such as digital singlelens reflex cameras.

The BlueCore line of Bluetooth products for CSR integrate a radio and baseband along with peripherals to match your application requirements. Variants are available with integrated ROM or flash, Multimedia versions with integrated DSP and stereo codec, or Plug-n-Go with integrated balun, filter and matching. BlueCore 3: CSR’s complete v1.2 Bluetooth solution including eSCO (extended Synchronous Connections), which allows for retransmissions of dropped packets, allowing for a cleaner, better sound out of your Bluetooth device. BlueCore 4: CSRs EDR (Enhanced Data Rate) v2.0 Bluetooth solution, it offers backwards compatibility with v1.1 and v1.2 Bluetooth devices. External Flash, ROM, Plug-n-Go and Headset versions are available to match your application. Offers up to 3 times the data rate as previous versions of Bluetooth with lower power consumption. BlueCore 5: series offers the latest generation technology, offering compatibility with the next generation Bluetooth spec,

LabPro单芯片蓝牙开发工具简介 - 豆丁网 labpro,开发,单芯片,蓝牙,LabPro,PAN,工具,应用程序,CSR,BlueCore,样例,eadset,星光第一季,IT计算机 IT计算机 开发文档 LabPro单芯片蓝牙开发工具简介

程序修改器 HA-eXeScope650 破解码.txt

常用的二极管DataSheet： 1N457 1N4728A 1N4764A1N4728A 1N4764A1N4728A 1N4764A1N4728A 1N4764A 1N4728A 1N4764A1N4728A 1N4764A1N4728A 1N4764A1N4728A 1N4764A

资料 OLED 资源列表 1，三星 2，LG 3，夏普 4，其他 5，可以再丰富 6，回到原来状态

中高压多层片状陶瓷电容器是在多 层片状陶瓷电容器的工艺技术、设备基 础上，通过采用特殊设计制作出来的一 种具有良好高压可靠性的产品，该产品 适合于表面贴装，适合于多种直流高压 线路，可以有效的改善电子线路的性能。

The SAA7154 provides a complete and versatile decoding solution for high-performance applications such as LCD displays, TVs/monitors, LCD projectors, automotive display modules and PC peripherals like TV boxes. This highlyintegrated system solution offers outstanding fl exibility and unsurpassed picture quality.