自定义博客皮肤VIP专享

*博客头图:

格式为PNG、JPG,宽度*高度大于1920*100像素,不超过2MB,主视觉建议放在右侧,请参照线上博客头图

请上传大于1920*100像素的图片!

博客底图:

图片格式为PNG、JPG,不超过1MB,可上下左右平铺至整个背景

栏目图:

图片格式为PNG、JPG,图片宽度*高度为300*38像素,不超过0.5MB

主标题颜色:

RGB颜色,例如:#AFAFAF

Hover:

RGB颜色,例如:#AFAFAF

副标题颜色:

RGB颜色,例如:#AFAFAF

自定义博客皮肤

-+
  • 博客(0)
  • 资源 (33)
  • 收藏
  • 关注

空空如也

stm8的电机库配置文件生成工具,亲测可用

stm8的电机库配置文件生成工具,自动生成配置头文件,用于STM8MC-KIT v1.0,

2018-11-16

支持stm8系列的CubeMX

支持stm8系列的CubeMX , 配置管脚非常方便 实用

2018-11-16

stm8支持的电机控制库, 包含ACIM和BLDC控制

stm8支持的电机控制库, 包含ACIM和BLDC控制,代码编译通过

2018-11-16

stm32的foc库 2.0,全部未删减,内含用户手册

stm32的foc库 2.0,全部未删减,内含用户手册, 包含示例,支持KEIL和IAR

2018-11-16

FreeRTOS最新源码8.2.3

官网下载的FreeRTOS最新源码,版本为8.2.3

2016-01-18

AutoDWG PDF to DWG Converter 3.0 Keygen

AutoDWG PDF to DWG Converter 3.0 ,内置注册机 要的赶快下载啊

2011-04-04

网络程序员伴侣.rar

网络程序员伴侣 ,网络程序员伴侣.rar网络程序员伴侣.rar

2011-03-30

DevExpress.Express.编程控件插件

DevExpress.Express.编程控件插件.rar,内行的人懂得

2011-03-30

[软件开发辅助工具].Visual.Build.Professional.v7.2.1.2-iNViSiBLE.zip

[软件开发辅助工具].Visual.Build.Professional.v7.2.1.2-iNViSiBLE

2011-03-30

visual assist x 10.6.1842.0 注册机

visual assist x 10.6.1842.0 注册机 本人亲测可用

2011-03-29

ollydbg1.1+全插件+700多种脱壳脚本

ollydbg1.1+全插件+700多种脱壳脚本 分卷压缩之part3

2011-03-21

ollydbg1.1+全插件+700多种脱壳脚本

ollydbg1.1+全插件+700多种脱壳脚本 分卷压缩之part2

2011-03-21

ollydbg1.1+全插件+700多种脱壳脚本

分卷压缩 共29m左右 分3卷 另两卷免费

2011-03-21

二级圆柱齿轮 说明书

二级圆柱齿轮 课程设计 说明书 来源:网络

2010-11-13

二级圆柱齿轮总装配图.dwg

二级圆柱齿轮总装配图.dwg,这个是从网上下载的

2010-11-13

修改过的taskmgr,可以显示进程映像路径

修改过的taskmgr,可以显示进程映像路径, 申明来源:网络收集

2010-03-25

CSDN VC编程经验总结

vc 编程经验总结,csdn的,我认为比较有用

2010-02-04

mc8051_cyclone_nios_designflow.pdf

Implementing the MC8051 IP Core On A Cyclone Nios Board First of all it is necessary to exchange the simulation models of all the memory blocks with real memory that can be found inside the target FPGA. It is also recommended to implement a PLL to get a clock signal with a lower frequency than that

2020-06-07

mc8051_boot.zip

mc8051_bootLoader 软核8051的BootLoader Change history: - Improved tb_mc8051_siu_sim.vhd to verify duplex operation. - Corrected problem with duplex operation in file mc8051_siu_rtl.vhd

2020-06-07

mc8051_overview.pdf

MC8051 IP Core Key Features - Fully synchronous design - Technology independent, clear structured, well commented VHDL source code - Easily expandable by adapting/changing VHDL source code - Parametrizeable design by simply changing VHDL constants - User selectable number (N) of timers/counters and serial interface units - Active timer/counter and serial interface units selected by additional special function register - Instruction set compatible to the industry standard 8051 microcontroller - Up to 10 times faster due to completely new architecture - Optional implementation of the multiply command (MUL) using a parallel multiplier - Optional implementation of the divide command (DIV) using a parallel divider - Optional implementation of the decimal adjustment command (DA) - No multiplexed I/O ports - 256 bytes internal RAM - Up to 64 kbyte ROM, up to 64 kbyte RAM - Source code available free of charge under the GNU LGPL license

2020-06-07

mc8051_design_v1.6.zip

8051软核源代码 This is version 1.6 of the MC8051 IP core. Changes: - In certain interrupt situations the stack pointer still has been erroneously set in control_mem_rtl.vhd, revision 1.10 and below. This has been corrected again in revision 1.11 of this file. - The Serial Unit did not handle receives with only one stop bit correctly in Mode1 in file mc8051_siu_rtl.vhd, revision 1.9 and below. This has been corrected with revision 1.10 of this file. - The CJNE opcode did not clear the carry flag when it should in file control_fsm_rtl.vhd, revision 1.9 and below. This has been corrected with revision 1.10 of this file.

2020-06-07

mc8051_user_guide.pdf

MC8051 IP Core Synthesizable VHDL Microcontroller IP-Core User Guide

2020-06-07

mc8051_bootstrap_ug.pdf

8051 IP核 Bootstrap Demo Design User Guide 很好的资料 General Description The following program allows the MC8051 microcontroller to load most of its code into a part of the external data memory (XRAM) over a serial link after power up. This program can be then executed out of the program memory (PRAM) for normal operation. Any static low level routines that are unlikely to change over time can be fixed into the permanent program memory (ROM) along with the bootstrap loader which is used to load the main routine which calls the static parts of the program into the PRAM. In the following, the memory map of the reference design is listed.

2020-06-07

B50610-DS07-RDS(博通千兆以太网手册) - 副本.pdf

B50610C1KMLG datasheet 10/100/1000BASE-T Gigabit Ethernet Transceiver The Broadcom® B50610 is a triple-speed 1000BASE-T/ 100BASE-TX/10BASE-T Gigabit Ethernet (GbE) transceiver integrated into a single monolithic CMOS chip. The device performs all physical-layer functions for 1000BASE-T, 100BASE-TX, and 10BASE-T Ethernet on standard category 5 UTP cable. 10BASE-T can also run on standard category 3, 4, and 5 UTP. The B50610 is a highly integrated solution combining digital adaptive equalizers, ADCs, phase-locked loops, line drivers, encoders, decoders, echo cancellers, crosstalk cancellers, and all required support circuitry. Based on Broadcom’s proven Digital Signal Processor technology, the B50610 is designed to be fully compliant with RGMII, allowing compatibility with industry-standard Ethernet MACs and switch controllers.

2020-05-13

VISIO电子元件库.rar

visio新版电子元件库 上百个图 基本满足要求

2020-03-25

几套PCI开发原理图pcb图.zip

几套PCI开发原理图pcb图.

2019-06-05

Recent Research in Control Engineering and Decision Making_2019.pdf

Recent Research in Control Engineering and Decision Making_2019, Springer出版的

2019-05-15

Nonlinear and Adaptive Control Systems:(非线性和自适应控制系统)

Nonlinear and Adaptive Control Systems:(非线性和自适应控制系统)

2019-04-06

Nonlinear and Adaptive ControlNCN42001(英文)

Nonlinear and Adaptive ControlNCN42001(英文)Nonlinear and Adaptive ControlNCN42001(英文)

2019-04-06

Nonlinear and Adaptive Control Design

Nonlinear and Adaptive Control Design 电子书 Nonlinear and Adaptive Control Design 电子书

2019-04-06

Software_Defined_Radio_using_MATLAB_Simulink_and_the_RTL-SDR.pdf

Software_Defined_Radio_using_MATLAB_Simulink_and_the_RTL-SDR.pdf,已去除文件保护,可编辑

2018-12-26

电机驱动机械手的自适应反演变结构控制

电机驱动机械手的自适应反演变结构控制,内部有自适应反演控制算法和变结构算法

2018-11-16

有感无刷电机驱动程序 已调试通过

有感无刷电机驱动程序 已调试通过。 主控芯片stm8s903,HALL换向

2018-11-16

空空如也

TA创建的收藏夹 TA关注的收藏夹

TA关注的人

提示
确定要删除当前文章?
取消 删除